The Teslong NTS500B Dual-Lens Inspection Camera is a portable digital borescope featuring a compact 5.0mm camera probe, forward and side-viewing lenses, and a 5-inch IPS display. Available with 1.5-metre and 5-metre flexible probe options, it enables convenient visual examination of inaccessible machinery components, automotive cavities, pipe interiors and enclosed equipment spaces. Its 2.0MP camera system offers Full HD photo and video recording, adjustable LED illumination and an IP67-rated probe for suitable inspection environments. The NTS500B also includes 32GB microSD storage, a rechargeable 3500mAh battery providing approximately 4–5 hours of operation, and a detachable USB-C camera probe. Suitable for automotive maintenance, plumbing, HVAC servicing, general engineering and equipment troubleshooting.
The Teslong NTS500B Dual-Lens Inspection Camera is a portable digital borescope designed to examine enclosed areas, mechanical components and internal passages that are difficult to inspect directly. Equipped with a 5.0mm dual-lens camera and 5-inch IPS display, the system allows technicians to view and record internal conditions without connecting a separate smartphone or computer.
The NTS500B is available with 1.5-metre and 5-metre flexible camera probes. Its forward-facing and side-viewing lenses provide two viewing directions, making it useful for automotive servicing, general machinery inspection, plumbing maintenance and equipment troubleshooting.
The 1.5-metre NTS500B configuration provides convenient inspection reach for accessible engine components, equipment housings, machine cavities and other nearby internal areas.
Its compact 5.0mm camera diameter allows entry through suitable narrow openings, while the flexible cable helps technicians position the camera inside enclosed spaces.
This configuration is suitable for customers who primarily perform short-reach inspections and prefer a manageable probe length for routine maintenance tasks.
The 5-metre NTS500B configuration is intended for applications requiring additional reach, including accessible ventilation passages, plumbing systems, machinery interiors and concealed equipment spaces.
Its longer flexible cable allows the camera to be guided further into suitable inspection routes. Actual reach depends on the passage dimensions, bends, obstructions and cable positioning.
Both configurations share the same camera diameter, lens arrangement, monitor and core imaging specifications. Customers should select the appropriate cable length according to their inspection requirements.
The NTS500B incorporates a dual-lens camera system that provides separate forward and side viewing. The forward camera helps operators examine surfaces directly ahead of the probe, while the side camera provides an alternative perspective of nearby internal walls and components.
Users can switch between the two cameras to observe different surfaces without repeatedly withdrawing the inspection probe.
This functionality is particularly useful when inspecting cylindrical passages, accessible mechanical cavities and enclosed assemblies.
The inspection probe uses 2.0-megapixel imaging technology to capture detailed visual information during close-range inspection.
Both the forward-facing and side-viewing cameras have a 70-degree field of view, providing practical image coverage when examining suitable internal surfaces.
The forward-facing camera has an approximate focusing range of 30mm to 80mm, making it suitable for examining surfaces directly ahead of the probe.
The side-viewing camera provides a closer working range of approximately 20mm to 50mm, allowing technicians to observe nearby internal walls and mechanical surfaces.
Choosing the appropriate camera direction and maintaining a suitable working distance helps obtain clearer inspection images.
The NTS500B features a 5.0mm diameter inspection camera designed for access through compatible small openings, internal passages and restricted equipment spaces.
The compact probe can be useful for examining accessible automotive components, machined cavities and mechanical housings where larger inspection cameras may not fit.
Users should confirm the available entry clearance before insertion, particularly when the probe must pass through bends or restricted mechanical openings.
The camera probe features a flexible yet sturdy construction that allows users to guide the camera through accessible passages and position it towards the inspection area.
Depending on the selected model, the probe provides either 1.5 metres or 5 metres of inspection reach.
The probe should be handled carefully to avoid excessive bending, twisting or contact with moving machinery.
The Teslong NTS500B includes a 5-inch IPS monitor with 854 x 480 pixel display resolution. The screen provides real-time viewing and convenient access to camera controls, image capture and recorded content.
Its standalone design allows operators to perform inspections without installing a mobile application or connecting an external viewing device.
The inspection monitor includes a tempered glass screen covering for additional protection during routine handling.
The compact tablet-style housing features conveniently positioned buttons, making it practical for workshop use, general maintenance and equipment servicing.
A monitor stand is included with the NTS500B to support hands-free screen positioning during suitable inspection activities.
This allows operators to place the monitor on a stable surface while guiding the flexible camera probe into an accessible inspection opening.
The NTS500B supports still-image capture and video recording at 1280 x 720 and 1920 x 1080 pixel resolutions.
These recording functions help technicians document visible deposits, surface irregularities, contamination, corrosion and other equipment conditions for later review.
The recorded image and video resolutions are separate from the monitor's native 854 x 480 pixel display resolution.
The inspection system includes a 32GB microSD memory card for storing photographs and videos.
Recorded inspection files can be reviewed on the monitor or transferred to a compatible computer for maintenance documentation, technical reporting and future reference.
The NTS500B includes a built-in microphone and speaker to support audio recording and playback functions.
This feature allows users to add spoken observations during supported video recording and review those recordings directly on the monitor.
The forward-facing camera incorporates six adjustable high-intensity LED lights to illuminate dark internal spaces.
These lights help reveal surfaces inside enclosed machinery, mechanical cavities and passages where external illumination is limited.
The side-facing camera includes one dedicated adjustable LED to illuminate nearby surfaces when the side-viewing lens is selected.
Brightness adjustment allows operators to adapt the illumination to the viewing distance and characteristics of the inspected surface.
The inspection monitor also features a 1W Cree LED work light that can illuminate the area surrounding an inspection opening.
This provides additional convenience when working in poorly lit workshops, equipment rooms and maintenance locations.
The Teslong NTS500B features a removable inspection probe with a USB-C connection to the monitor.
Its modular design allows compatible camera probes to be disconnected and replaced when required.
Selected alternative Teslong inspection probes may be used with the NTS500B monitor, subject to connector compatibility and manufacturer recommendations. These optional probes are not included in the standard dual-lens package.
The NTS500B camera probe has an IP67 protection rating, providing resistance to dust and temporary water immersion under specified testing conditions.
The manufacturer specifies probe protection for temporary immersion at depths of up to approximately one metre for a maximum of 30 minutes under IEC 60529 conditions.
The IP67 rating applies to the rated inspection probe and does not extend to the complete camera system.
The monitor has a separate IP45 protection rating. Its screen, electrical connectors and charging interface should be protected from unsuitable exposure to liquids.
The NTS500B is intended for general inspection applications and should not be treated as a specialised heavy-duty industrial videoscope for continuous operation in harsh environments.
The inspection monitor contains a 3500mAh rechargeable lithium battery that provides approximately 4 to 5 hours of operating time, depending on usage conditions.
The integrated battery supports portable inspection without a continuous external power connection.
A USB-C charging interface enables convenient battery recharging using a suitable power source.
The compact monitor and flexible probe can be stored in the supplied carrying case for transportation between inspection locations.
The Teslong NTS500B can assist technicians in examining accessible engine cylinders, internal vehicle cavities, mechanical housings and restricted automotive components.
Its dual-lens system provides different viewing perspectives for observing internal surfaces during diagnostics and maintenance.
The camera can be used for periodic visual examination of suitable machinery interiors, equipment housings, mechanical assemblies and concealed components.
It supports the observation and documentation of visible deposits, contamination, corrosion and surface conditions during maintenance activities.
The compact probe can assist with visual inspection of suitable manufactured parts, accessible internal channels, mechanical passages and component cavities.
The side-viewing lens provides an additional perspective when the inspection surface is positioned close to the camera's side.
The NTS500B can be used to examine suitable cast housings and internal cavities where the 5.0mm probe diameter and fixed focusing distances are appropriate.
Photographs and video recordings can help inspection personnel document visible irregularities, residues and surface conditions.
The flexible probe supports examination of accessible air-conditioning equipment, ventilation openings and enclosed service passages.
The 5-metre option provides additional reach for suitable inspection routes compared with the shorter 1.5-metre configuration.
The camera can assist with examining accessible pipe interiors, plumbing fittings and suitable drainage passages.
Its adjustable lighting and IP67-rated probe provide useful inspection capabilities in compatible damp environments, while the monitor and electrical connections must remain protected.
The NTS500B is a practical option for technicians who need a standalone camera to examine hard-to-reach areas during occasional maintenance, servicing and fault investigation.
The Teslong NTS500B Dual-Lens Inspection Camera package includes a 5-inch IPS inspection monitor and the selected 5.0mm dual-lens camera probe with a 1.5-metre or 5-metre flexible cable.
The package also contains a 32GB microSD memory card, USB-C charging cable, monitor stand, hook attachment, magnet attachment and carrying case.
Customers should confirm the required probe length when requesting a quotation, as the NTS500B is available in two standard cable configurations.
Shree Kay Vee Automation (SKVA) is an authorised Teslong distributor in India, supplying borescopes, digital inspection cameras and visual inspection equipment for automotive servicing, engineering, maintenance and manufacturing applications.
Our team assists customers in selecting inspection equipment based on camera diameter, probe length, viewing direction, access limitations and application requirements.
Contact Shree Kay Vee Automation for quotations, product availability, technical assistance and recommendations regarding the Teslong NTS500B Dual-Lens Inspection Camera.
Website: www.borescope.in

The Teslong TD500 2-Way Articulating Industrial Borescope is a professional inspection system designed for automotive diagnostics, machinery maintenance and manufacturing quality inspection. The series offers 3.9mm, 6.5mm and 8.5mm single-lens configurations, along with a 6.5mm dual-lens model featuring front and side viewing with split-screen functionality. All configurations feature a 1.55-metre flexible probe, manually controlled 210° camera-tip articulation and a 5-inch IPS display. With adjustable LED illumination, Full HD photo and video recording, Wi-Fi remote viewing, IP67-rated camera-probe protection, 32GB microSD storage and a rechargeable 3000mAh battery, the TD500 supports detailed inspection of difficult-to-access internal components. Camera resolution and optical specifications vary by configuration.

The Teslong TF500 2-Way Articulating Borescope is a professional visual inspection system featuring a 6.5mm single-lens camera, 1.55-metre semi-rigid probe and detachable 5-inch IPS display. Its controllable camera tip provides a 210° two-way articulation range, allowing technicians to inspect internal surfaces that are difficult to view with conventional fixed-angle borescopes. The TF500 combines adjustable LED illumination, 1920 × 1080 Full HD photo and video recording, Wi-Fi remote viewing, an IP67-rated camera probe and 32GB microSD storage. Powered by a rechargeable 3000mAh battery, its compact modular design is suitable for automotive diagnostics, machinery maintenance, manufacturing inspection and equipment troubleshooting.

The Teslong NTC30TP Telescopic Inspection Camera is a compact USB-C visual inspection tool designed for reaching elevated, recessed and difficult-to-access spaces. Its stainless steel telescopic rod extends from 0.28 to 1.5 metres, while the 110mm manually formable camera section offers flexible positioning at angles of up to 210°. The 8.5mm single-lens camera features a 79° field of view, eight adjustable LEDs and an IP67-rated inspection head. Compatible with supported USB-C Android and iPhone devices through the Xscope app, it enables live viewing, photo capture and video recording without a separate monitor or battery. Ideal for HVAC maintenance, building inspection, machinery servicing, overhead checks and general equipment troubleshooting.