The Teslong TF500 2-Way Articulating Borescope is a professional visual inspection system featuring a 6.5mm single-lens camera, 1.55-metre semi-rigid probe and detachable 5-inch IPS display. Its controllable camera tip provides a 210° two-way articulation range, allowing technicians to inspect internal surfaces that are difficult to view with conventional fixed-angle borescopes. The TF500 combines adjustable LED illumination, 1920 × 1080 Full HD photo and video recording, Wi-Fi remote viewing, an IP67-rated camera probe and 32GB microSD storage. Powered by a rechargeable 3000mAh battery, its compact modular design is suitable for automotive diagnostics, machinery maintenance, manufacturing inspection and equipment troubleshooting.
The Teslong TF500 2-Way Articulating Borescope is a portable visual inspection system designed for examining internal machinery components, automotive assemblies and other hard-to-reach mechanical areas. Equipped with a 6.5mm single-lens camera, 1.55-metre semi-rigid inspection probe and 5-inch IPS display, it allows technicians to investigate equipment interiors without unnecessary dismantling.
The TF500 combines a steerable camera tip, adjustable LED illumination, high-definition recording and a detachable monitor assembly. Its compact design makes it a practical inspection tool for automotive workshops, industrial maintenance teams, manufacturing facilities and engineering service providers.
The Teslong TF500 features a two-way articulating inspection probe with a total steering range of up to 210 degrees. The directional control mechanism enables operators to bend the camera tip towards an inspection target instead of relying entirely on the position of the flexible cable.
This capability is especially useful when examining internal walls, mechanical cavities and components positioned away from the probe's original viewing direction.
The handheld unit incorporates an accessible articulation control for adjusting the camera-tip direction during inspection.
A locking function helps maintain the chosen camera position when a particular surface requires closer examination. Before withdrawing the probe, operators should return the camera tip to a suitable straight position to prevent damage.
Compared with a conventional fixed-tip inspection camera, the TF500 provides additional control when navigating accessible internal openings and examining surfaces around mechanical components.
The articulating mechanism supports inspection of suitable engine cavities, machinery housings, internal channels and confined spaces where direct line-of-sight viewing is difficult.
The standard TF500 configuration includes a 6.5mm diameter single-lens camera. Its compact camera head is suitable for access openings and mechanical passages that provide sufficient clearance for the probe.
The smaller camera diameter is useful for inspection tasks where larger borescopes cannot be inserted easily. The actual clearance required depends on the inspection opening, cable bends and surrounding components.
The standard 6.5mm single-lens configuration provides a 70-degree camera field of view. This allows users to examine a practical area around the camera's viewing direction while maintaining control over the probe-tip position.
The camera combines directional steering with a forward-facing imaging system. It does not require an additional side camera to change the viewing direction.
The TF500 includes a 1.55-metre semi-rigid inspection cable designed to provide a balance between flexibility and shape retention.
The cable can be guided through accessible machinery openings and suitable internal passages, while the articulating camera tip provides additional control at the inspection point.
Operators should avoid sharp bends, excessive pulling forces and unsuitable contact with moving machinery to protect the probe assembly.
The 1.55-metre probe provides sufficient reach for many automotive maintenance and general machinery inspection applications.
When choosing a borescope, users should consider both the distance to the inspection area and the number of bends along the access path. The probe length should be selected according to the actual equipment geometry.
The Teslong TF500 incorporates a 5-inch IPS display with 854 x 480 pixel screen resolution. The monitor provides live inspection viewing and allows technicians to examine internal components without connecting a separate smartphone or computer.
The screen is protected by tempered glass and features accessible operating buttons for menu navigation, inspection recording and display functions.
The TF500 features a detachable monitor and handheld control assembly. This modular design allows the system to be separated for convenient storage and transportation.
The equipment can be packed into its protective carrying case, making it suitable for maintenance technicians who perform inspections at different workstations, production lines and customer locations.
The inspection system supports photograph capture at 1280 x 720 and 1920 x 1080 pixel resolutions. Images are saved in JPG format for convenient review and documentation.
Captured photographs can help maintenance personnel record visible component conditions, contamination, deposits, corrosion and other inspection observations.
The TF500 also supports video recording at 1280 x 720 and 1920 x 1080 pixel resolutions, with recordings saved in MOV format.
Video documentation is useful for reviewing camera movement, sharing visible inspection findings and comparing equipment conditions during maintenance activities.
The recording resolution is separate from the 854 x 480 pixel resolution of the built-in IPS display.
The inspection camera includes a 32GB microSD memory card for storing inspection photographs and video recordings.
The removable memory card allows recorded files to be transferred to a compatible computer for technical reports, maintenance records and further review.
The TF500 incorporates six adjustable LED lights around the camera lens to illuminate dark mechanical spaces and enclosed equipment interiors.
The integrated lighting helps operators inspect surfaces where external light cannot reach, including accessible engine components, machinery passages and internal assemblies.
LED brightness can be adjusted according to the inspection distance and surface conditions. Lower illumination may be useful for highly reflective components, while brighter settings can improve visibility in dark cavities.
The TF500 supports Wi-Fi remote viewing, allowing live inspection images to be displayed on compatible smartphones and tablets through supported viewing software.
This feature can assist engineering teams when multiple people need to observe an inspection or when the handheld monitor is positioned away from the person reviewing the images.
The integrated display remains available for normal standalone inspection without a mobile connection.
The TF500 camera probe features an IP67 protection rating, providing resistance to dust and temporary water immersion under specified testing conditions.
The manufacturer specifies protection for the camera probe at water depths of up to approximately one metre for a maximum of 30 minutes under IEC 60529 testing conditions.
This protection rating applies to the rated camera probe only. The handheld monitor, charging connections and other electrical components should not be immersed in water.
The recommended operating temperature range is 0°C to 45°C. Users should ensure that equipment surfaces and inspection environments remain within the specified operating limits.
The TF500 is not designed for inspection inside operating machinery containing moving components or for environments exceeding the manufacturer's stated temperature limits.
The inspection system is powered by a built-in 3000mAh rechargeable lithium battery, providing up to approximately four hours and twenty minutes of operation under suitable conditions.
Actual operating time depends on factors such as LED brightness, video recording, wireless viewing and battery condition.
The TF500 features a USB-C charging interface for convenient battery charging. The supplied charging cable allows the system to be recharged using an appropriate USB power source.
The Teslong TF500 is suitable for visual examination of accessible automotive engine cavities, internal mechanical components, vehicle housings and other confined areas.
Its articulating camera tip can assist technicians in examining surfaces that are not directly aligned with the inspection opening.
Maintenance engineers can use the TF500 to inspect machinery interiors, mechanical assemblies, accessible equipment cavities and enclosed housings during routine maintenance and fault investigation.
The camera supports visual identification and documentation of deposits, contamination, corrosion, surface wear and other observable equipment conditions.
The TF500 can assist quality inspection personnel in examining suitable manufactured parts, machined passages, enclosed assemblies and mechanical components where direct visual access is restricted.
Its recording capabilities support inspection documentation and review of visible component conditions.
The 6.5mm articulating camera can be used to examine accessible cast housings, mechanical channels and internal cavities where sufficient clearance is available.
The controllable camera tip provides additional flexibility when examining internal walls for visible irregularities, residual material, deposits and surface conditions.
The TF500 supports general inspection of suitable precision-engineered components, mechanical passages and equipment assemblies that require a steerable visual inspection camera.
Application suitability should be evaluated according to the component dimensions, probe bending requirements and operating environment.
The inspection system can assist technicians with visual examination of accessible ventilation equipment, air-conditioning housings, service passages and enclosed mechanical spaces.
The TF500 is a practical inspection tool for examining restricted spaces inside mechanical equipment during troubleshooting, preventive maintenance and servicing activities.
The Teslong TF500 2-Way Articulating Borescope package includes a 5-inch IPS inspection monitor, handheld control assembly and 6.5mm single-lens articulating camera probe with a 1.55-metre semi-rigid cable.
The kit also includes a 32GB microSD memory card, USB-C charging cable, hook attachment, magnet attachment and protective compartment carrying case.
Shree Kay Vee Automation (SKVA) is an authorised Teslong distributor in India, supplying articulating borescopes, industrial inspection cameras and visual inspection equipment for automotive, manufacturing, engineering and maintenance applications.
Our team assists customers in selecting suitable inspection equipment based on camera diameter, articulation requirements, probe length, recording capability and application conditions.
Contact Shree Kay Vee Automation for quotations, product availability, technical assistance and application-specific recommendations regarding the Teslong TF500 2-Way Articulating Inspection Camera.
Website: www.borescope.in

The Teslong NTC30TP Telescopic Inspection Camera is a compact USB-C visual inspection tool designed for reaching elevated, recessed and difficult-to-access spaces. Its stainless steel telescopic rod extends from 0.28 to 1.5 metres, while the 110mm manually formable camera section offers flexible positioning at angles of up to 210°. The 8.5mm single-lens camera features a 79° field of view, eight adjustable LEDs and an IP67-rated inspection head. Compatible with supported USB-C Android and iPhone devices through the Xscope app, it enables live viewing, photo capture and video recording without a separate monitor or battery. Ideal for HVAC maintenance, building inspection, machinery servicing, overhead checks and general equipment troubleshooting.

The Teslong N7 Pro Dual-Lens Industrial Borescope is a professional inspection system featuring a 5.5mm dual-lens camera, 2-metre flexible semi-rigid probe and large 7-inch HD IPS display. Its front and side cameras provide two viewing perspectives, while split-screen functionality allows simultaneous examination of internal surfaces. Designed for automotive diagnostics, industrial machinery maintenance, manufacturing inspection and equipment troubleshooting, the N7 Pro offers Full HD photo and video recording, Wi-Fi remote viewing, seven adjustable camera LEDs and an IP67-rated inspection probe. A 6000mAh rechargeable battery provides approximately 3–4 hours of operation, while the included 32GB microSD card supports convenient inspection documentation.

The Teslong NTG450H Rigid Rifle Borescope is a portable inspection system featuring a 5.0mm stainless steel camera probe, 26-inch (66cm) rigid shaft and 4.5-inch IPS display. Designed for close-range internal barrel inspection, it combines a 1.0MP camera, 70° field of view, six adjustable LEDs and five interchangeable side-view mirrors for examining internal surfaces from different perspectives. The standalone monitor supports 1920 × 1080 photo capture, 1280 × 720 video recording and 32GB microSD storage without requiring a smartphone or computer. Its 2500mAh rechargeable battery provides up to four hours of operation, making it suitable for firearm maintenance inspections, barrel condition assessment and specialised close-range visual examination.